15/16×18 Single Spur Ship Auger Wood Drill Bit

$62.09

Discover the 15/16×18 Single Spur Ship Auger Drill, a high-performance tool engineered for precision and ease in woodworking. Perfect for professionals and DIY enthusiasts, this durable drill bit effortlessly cuts clean, precise holes in wood. Enhance your toolbox with this versatile, long-lasting auger drill and achieve superior results in all your projects.

Description

Introducing the 15/16×18 Single Spur Ship Auger Wood Drill Bit, a cutting-edge tool designed to simplify your drilling tasks with ease and precision. This high-performance drill bit features a ship auger design and a single spur, allowing it to effortlessly cut through wood and deliver clean, precise holes every time. Ideal for both professional carpenters and DIY enthusiasts, this versatile drill bit is a must-have addition to any toolbox. Its durable construction ensures long-lasting performance, while the 15/16×18 size makes it suitable for a wide range of woodworking projects. Upgrade your drilling experience today with the 15/16×18 Single Spur Ship Auger Wood Drill Bit and enjoy superior results in all your woodworking endeavors.

Additional information

Weight 2 lbs
Dimensions 18 × 1 × 1 in
Diameter Size

15/16

For Use On

Drywall, Insulation, Plaster, Plastic Conduit, PVC, Wood

Overall Length

18

Size Type

Fractional

FAQ's: Wood Drill Bits

Yes—easily, and it’s designed to clear chips as it drills deep holes.

The bit may be too small for the screw, or you’re not using enough torque.

No pilot hole, dull bit, drilling too close to edges, or drilling too fast.

The bit may be dull, the drill in reverse, or the wood too hard for the bit type.

Brad point, spade, and auger bits are wood-specific.

Use the drill’s standard setting with moderate speed—no hammer function.

Ship auger bits or flex bits for drilling through studs and joists.

Ship auger bits can reach 18" or more.

Brad point bits for precision, spade bits for speed, and auger bits for depth.

A hole saw or large Forstner bit.

For general use, a brad point bit. For deep holes, an auger bit.

Drilling clean, accurate holes in wood and similar soft materials.

Common types include twist bits, spade bits, auger bits, and Forstner bits.

No. Wood drills best dry; lubrication is for metal or masonry.

Moderate speed—too fast can burn the wood, too slow can cause tearing.

Dry wood. Wet wood can gum up bits, swell, and split when it dries.

Flat (spade) bits are faster and cheaper; hole saws cut cleaner and handle larger diameters better.

Wood bits have a point and spurs; steel bits are blunter with a chisel edge for cutting metal.

It has a sharp center point and often spurs on the edges.

Use a sharp bit, pre-drill pilot holes, avoid drilling too close to edges, and reduce speed near the end.

Match the bit type to the job—twist bits for small holes, spade bits for quick larger holes, and Forstner bits for clean, flat-bottom holes.

Use a drill guide or drill press. Without one, keep the drill steady and check alignment from multiple angles.

Use painter’s tape over the spot, drill slowly, and back the bit out gently before it breaks through.

Mark your spot, use a sharp wood bit, set the drill to medium speed, and apply steady pressure.

You’ll feel less resistance than with metal, and the shavings will be light, curly, and sawdust-like.

Look for a sharp center point and spurs on the edges—these help guide and cut clean holes in wood.

Yes, for best results. Wood bits have sharp points and spurs to cut fibers cleanly.

Not ideal. While metal bits can drill wood, they’re slower and less clean. Wood bits are designed for faster, cleaner cuts.

Not ideal. While metal bits can drill wood, they’re slower and less clean. Wood bits are designed for faster, cleaner cuts.

Yes. Auger bits are designed specifically for wood, cutting clean, deep holes quickly and efficiently.

Related Products